Apollo Smoke Detector XP95 Bedienungsanleitung PDF herunterladen (Seite 6)

Document Ref. XP95app.doc/Rev1 09.06.99 Page 6 of 11 Originator MC Checked by AC

5.3 Typical Schematic Drawing for A1446 Outstation

5.4 Input and Output Responses

The following chart lists the input/output responses by type code setting the unit’s DIL

switch.

The columns are as follows:

Part number The most suitable product for the type code setting listed.

Type A description of its type function.

Code The type code number.

Input (IP 1,2,3) The three outstation inputs. The columns describe the text display

response at the control panel.

Mode 1, 2 & 3 indicate on the panel display and sound its internal buzzer

only.

Alert/Valve closed will put the panel into its alert mode with full

display operation but no alarm circuit operation.

Fire will cause the panel to give a normal fire response.

Fault will cause the panel to give a fault display and operate the common

fault relay.

Refer to Programming Guide/Disk for cause/effect programming options..

Programmable Independent programmable outputs. Prog. indicates that the function is

Output Channel programmable by the panel’s cause/effect. The terminology “Channel

A, B, C A,B,C” appears on the PC-based panel cause & effect programme.

All other output responses are pre-set and cannot be changed.

NOTE: Channels A,B,C correspond to the Apollo output bits 0,1,2, respectively.

1 2 3 4 5 6 7 8 9 10 11

Keine Kommentare

Apollo Smoke Detector XP95 Bedienungsanleitung Seite 6