Apollo Ultra Speed Oven 4X Installationsanleitung PDF herunterladen (Seite 27)

Troubleshooting

Contents

4. Troubleshooting

4.1 Resolving problems yourself

Problems during installation

• Press the eject button to check whether or not the device is getting any power. If this is not the case, then check

that the power connector is correctly connected.

• When booting the system check whether the device is identified by the system. If this is not the case, then check

whether the E-IDE connector is correctly connected and whether the MASTER/SLAVE setting is correct. Also

check whether the device is connected to the end of the E-IDE cable.

• Make sure that the most recent bus master drivers for your IDE controller have been installed. These are

normally supplied together with your motherboard or your PC. For further details consult your motherboard or

PC manual.

• Check whether DMA (Direct Memory Access) has been activated.

Problems when reading a disc

• Press the eject button to check whether or not the device is getting any power. If this is not the case, then check

that the power connector is correctly connected.

• Check that the E-IDE connector is correctly connected and that the MASTER/SLAVE setting is correct. Also

check whether the device is connected to the end of the E-IDE cable.

• Make sure that the most recent bus master drivers for your IDE controller have been installed. These are

normally supplied together with your motherboard or your PC. For further details consult your motherboard or

PC manual.

• Check whether DMA (Direct Memory Access) has been activated.

• Make sure that the disc is placed correctly in the disc tray.

• Check that the disc that you wish to read is not dirty or damaged.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Keine Kommentare

Apollo Ultra Speed Oven 4X Installationsanleitung Seite 27