Apollo Explorer Bedienungsanleitung Seite 236
- Seite / 402
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
7. Explorer
236/402
_________________________________________________
Barco – Apollo – DOC-3197-2 – user's manual – Revision 08 – November 2006
7.11.1.4 Error
This tab informs about occurrence and kind of error. An error which has taken place is indicated by a tick.
Lamp error Lamp not working
I2C error Error on the I2C Bus
Initialize error Fan could not be initialized
I2C Status Communication error of the I2C Bus
LatencyCounterActive Latency counter is still running
Sync error No video signal present
Over Temperature Temperature above the limit
Temperature Failure Lamp has been switched off due to over temperature
Fan Failure Fan not working
In Load Sequence Internal tables are initialized (interferences might occur)
Reinitialization Settings saved in the EEPROM are loaded into the projector's RAM
Reset AC Fail Bit Interrupts in the power supply set the AC-Fail Bit. The lamp can only be switched
on again after having reset this bit, i. e. after pressing the Reset AC Fail Bit but-
ton.
Look at the tab Error (AC Fail) to find out if the bit is set or not.
Reset Temp Bit Temperatures above the defined limit set the Temp Bit.
Look at the tab Error (Over Temperature) to find out if the bit is set or not.
If the option Off the lamp at Over Temperature is checked, a lamp can only be
switched on again after having reset the Temp Bit.
- User’s manual 1
- Document History 3
- Do not discard this page! 3
- Corrections 6
- Table of Contents 7
- Preliminary remarks 15
- Styles and symbols 16
- Introduction 17
- Summary 18
- Apollo components 19
- 2. Introduction 21
- New functions 23
- Installation 27
- Best practice 28
- Requirements 28
- Used ports 29
- 4.4 Setup 30
- Control Room Configurator 37
- 5.3.2 Template and shapes 39
- 5.3.2.1 Stencils Devices.vss 41
- 5.3.2.7 Projection module S70 44
- 5.3.2.8 Phoenix DX Projector 44
- RANSFORM A 48
- 5.3.2.17 Visu 49
- 5.3.2.18 Device Group 51
- 5.3.2.24 BigVideo ( obsolete) 54
- 5.3.2.25 QuadVideo (obsolete) 54
- Quad SDI Video 55
- 5.3.2.38 Data field 56
- 5.3.2.47 OCM 58
- 5.3.2.48 Stencils Barco 3 59
- Party Devices.vss 59
- 5.3.2.49 Matrix Switcher 59
- 5.3.2.50 Command Source 59
- 6 Viewer 63
- Concept 64
- Apollo 1.9 Viewers 65
- Limitations 66
- Communication memory 67
- 6. Viewer 68
- • Double-click on setup.exe 80
- Launching Viewer 86
- Controlling Viewers 87
- • Activate the Pointers tab 88
- 6.8.1.2 Decoration 92
- 6.8.1.3 Basic 94
- 6.8.1.4 Advanced 96
- 6.8.1.5 RGB Presets 98
- 6.8.1.7 Stream Parameter 100
- 6.8.1.8 Add 101
- 6.8.1.9 Configure encoder 101
- 6.8.1.10 Board Settings 102
- 6.8.1.11 Interaction 103
- 6.8.2 Visu Viewer 104
- 6.8.2.2 Decoration 106
- 6.8.2.3 Basic (Video source) 108
- 6.8.2.4 Basic (RGB source) 109
- 6.8.2.5 Advanced 110
- 6.8.2.6 RGB Calibration 112
- 6.8.3 Cottus Viewer 114
- 6.8.3.2 Decoration 116
- 6.8.3.3 Basic 119
- 6.8.3.4 Scaling 120
- 6.8.3.5 Record 121
- 6.8.3.6 Play 122
- 6.8.4 VNC Viewer 123
- 6.8.4.2 Decoration 125
- 6.8.4.3 Basic 127
- 6.8.4.4 Aspect 128
- 6.8.4.5 Encoding 129
- 6.8.5 ProViewer 130
- 6.8.5.2 Decoration 132
- 6.8.5.3 Basic 134
- 6.8.5.4 Aspect 135
- 6.8.5.5 Encoding 137
- 6.8.5.6 Special keys 138
- 6.8.6 Web Viewer 140
- URL directly 141
- 6.8.6.2 Decoration 142
- 6.8.7 MPEG Viewer 145
- PlayPlay 147
- 6.8.7.2 Decoration 148
- 6.8.8 VTplus Viewer 150
- 6.8.8.2 Decoration 152
- 6.8.8.3 Basic 154
- In Display Caption 155
- Global Viewer Parameters 166
- 6.14.1 FRG Viewer parameters 168
- ; 2: S-Video 172
- 6.14.4 VNC Viewer parameters 173
- 6.14.5 Pro Viewer parameters 174
- 6.14.6 Web Viewer parameters 176
- 6.14.7 MPEG Viewer parameters 176
- Remote Pointer 177
- 6.15.2 File menu 178
- 6.15.2.2 Authentication 179
- 6.15.3 View menu 180
- 6.15.4 Tools menu 181
- 6.15.4.2 Special keys 183
- 6.15.5 Help menu 184
- 6.15.6 Status bar 184
- Explorer 187
- Starting the Explorer 188
- Explorer User Interface 188
- 7.2.3 Adjusted menu bar 189
- 7.2.4 Task bar 189
- Object Tree 190
- 7.3.1 Desktop Server 191
- 7. Explorer 192
- 7.3.2 Device 193
- 7.3.3 Overview: device 194
- 7.3.4 Display Source 194
- 7.3.5 Web Source 195
- 7.3.6 TV Source 196
- 7.3.8 Viewer 197
- Source Tree View 198
- Explorer workspace 199
- Explorer menu bar 199
- 7.6.2 View menu 200
- 7.6.3 Tools menu 201
- 7.6.3.1 Remote Desktop tab 202
- 7.6.3.2 Preview tab 203
- 7.6.3.3 Frg Pictures tab 205
- 7.6.3.4 Appearance tab 208
- Help menu 211
- Remote Desktop menu 212
- 7.8.1 Connect 213
- 7.8.2 Virtual Desktop 214
- 7.8.3 Task bar 215
- 7.8.4 Window properties 216
- 7.8.5 Invisible windows 217
- 7.8.6 Command line 217
- 7.8.7 Keyboard input 217
- 7.8.8 Show FRG pictures 218
- 7.8.9 Show preview 218
- 7.8.10 Refresh preview 218
- 7.8.11 Permissions 219
- 7.8.12 Permission edit 220
- Layout Selector menu 223
- 7.9.3 Unload all layouts 224
- 7.9.4 Reload layouts 224
- 7.9.2 Connect 224
- 7.9.5 Save layouts 225
- 7.9.6 Groups 227
- 7.9.7 Active layout only 227
- 7.9.8 Permissions 227
- 7.9.9 Context menus 229
- Explorer tool bar 230
- 7.11.1 OverView-mP50 233
- 7.11.1.2 Info 234
- 7.11.1.3 Lamp Control 235
- 7.11.1.4 Error 236
- 7.11.1.5 Projector 237
- 7.11.1.6 Identification 238
- 7.11.2 LCD_DLP Projectors 239
- 7.11.2.2 Info 240
- 7.11.2.3 Mode Control 241
- 7.11.2.4 Commands 242
- 7.11.2.5 Picture Control 244
- 7.11.2.6 Audio Control 245
- 7.11.3 Hermes D2D 246
- 7.11.3.2 Info 247
- 7.11.3.3 Input Control 248
- 7.11.4 Hermes V2A 249
- 7.11.4.2 Info 250
- 7.11.4.3 Input Control 251
- 7.11.5 Matrix Switcher 252
- 7.11.5.2 Info 253
- 7.11.5.3 Input/Output 254
- 7.11.6 Visu 255
- 7.11.6.2 Info 256
- 7.11.6.3 HardwareAttributes 257
- 7.11.6.4 Hardware Color 258
- 7.11.6.5 Output Unit 259
- 7.11.6.6 Input Unit 260
- 7.11.7 Phoenix Projector DX 261
- 7.11.7.2 Info 262
- 7.11.7.3 Lamp Control 263
- 7.11.7.4 Picture Control 264
- 7.11.7.5 Profile 265
- 7.11.7.6 Commands 266
- 7.11.8 OverView D 267
- 7.11.8.2 Info 268
- 7.11.8.3 Lamp Control 269
- 7.11.8.4 Error 270
- 7.11.8.5 Projector 271
- 7.11.8.6 Lamp History 272
- 7.11.9 OverView cPU67-DL 273
- 7.11.9.2 Projector 275
- 7.11.9.3 Lamp Control 276
- 7.11.9.4 InfraRed Control 277
- - to reduce, on + 278
- + to increase the set value 278
- Explorer Context Menu 279
- Drag&Drop functionality 282
- Layout Editor 285
- Layout database 286
- Launching the Layout Editor 287
- 8. Layout Editor 289
- Layout Editor menus 290
- 8.3.2 Edit menu 291
- 8.3.3 Properties menu 293
- 8.3.3.2 Layout properties 295
- Load automatically 296
- Hidden layouts 297
- 8.3.3.3 Window properties 298
- Start and terminate 299
- Advanced 300
- 8.3.3.4 Shortcut properties 301
- 8.3.3.6 Region properties 302
- 8.3.3.7 Default Area 303
- 8.3.4 Window menu 304
- 8.3.5 Favorites menu 304
- 8.3.5.2 Organize favorites 305
- 8.3.6 Tools menu 306
- 8.3.7 Settings menu 307
- 8.3.8 Help menu 309
- 8.4.2 Defining regions 312
- 8.4.4 Defining layouts 313
- A dialog pops up: 318
- 8.4.5 Preloading viewers 321
- Desktop Server 327
- Launching the Desktop Server 328
- Closing the Desktop Server 329
- Project Backup 331
- General 332
- Creating the backup file 333
- 10. Project Backup 335
- Restoring an Apollo project 336
- Command Interface 337
- Device command Interface 338
- Desktop command Interface 341
- Viewer command Interface 342
- Control Room Bus services 345
- Control Room Bus 346
- Serial command interface 347
- 12.2.2 Mode of operation 348
- TCPIP command interface 349
- 12. Control Room Bus services 350
- Application management 351
- License management 352
- Time synchronization 353
- Log file 353
- Security Provider 353
- 12.8.1 Defining accessGroups 354
- 12.8.1.1 DefaultPermission 355
- 12.8.3 Permissions 357
- Settings 362
- Apollo Internationalization 362
- Layout icons 363
- Apollo font settings 364
- Apollo uninstall 365
- Soap API Service 367
- 14. Soap API Service 369
- Setup then continues 369
- Installation of the SOAP SDK 372
- • Press the Enter key 373
- Configuration of the DCOM 375
- • System 377
- • Interactive 377
- • Administrator 377
- 14.5.2 Windows XP 378
- Access Permission 379
- 14.5.2.1 Launch Permissions 380
- 14.5.2.2 Access Permissions 381
- Appendix 383
- Commands via keyboard 384
- Identifying windows 385
- Redundant Apollo System 386
- rgbbcgo x x 395
- rgbbcoo x x 395
- rgcgo x x 395
- rgbgcoo x x 395
- rgbgfgo x x 395
- rgbrcoo x x 396
- Hotline 401
- Addresses 402
Trademark Fine Art ALI0277-p5-set manuals
Owner’s manuals and user’s guides for Unknown Trademark Fine Art ALI0277-p5-set.
We providing 1 pdf manuals Trademark Fine Art ALI0277-p5-set for download free by document types: Instruction Manual
Trademark fine art ALI0277-p5-set Instruction Manual (1 pages)
Brand: Trademark-fine-art | Category: No info | Size: 2.23 MB |
Table of contents
More products and manuals for Unknown Trademark Fine Art
| Models | Document Type |
|---|---|
| ALI0268-P6-SET |
Instruction Manual
Trademark Fine Art ALI0268-P6-SET Instructions / Assembly,
1 pages
|
| PSL020-p5-set |
Instruction Manual
Trademark Fine Art PSL020-p5-set Instructions / Assembly,
1 pages
|
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.039 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern